• FAA 1000.5    

• Composed of 1 FAA M1 Multi-Channel Chasis and Power supply and 5 FAA MCM mono channel modules pre-installed at the factory.

• FAA M1 Multi-Channel Chasis and Power Supply    

• 5 open modular slots for use with any combination of FAA MCM and FAA SCM amp modules

• Class G Switch Mode Power Supply

• Power Consumption idle 1 Amp max, full power 10.5 Amps max

• Dimensions: 7.5"H x 17"W x 15.75"D

• Weight: 62 Lbs (Loaded with 5 modules)

• FAA MCM Mono Amplifier Module

• 200 Watts x 1 @ 4, 6 or 8 Ohms

• J-Fet Input Stage

• Mosfet output Stage

• Full power frequency response 20Hz - 20KHz

• THD at 4 ohms .05% or less

• Damping factor over 800 to 400 Hz

• Input Impedance nominal 47K ohms

• Input Sensitivity 1.4V RMS for rated output at 8 ohms

• Slew rate 50V/us

• Signal to noise ratio 119db AWGT

• FAA SCM 2-Channel Amplifier Module

• 100 watts x 2 @ 4, 6 or 8 ohms

• Adjustable gain control

• All other specifications as above (FAA MCM)

Copyright © 2003  Custom Audio-Video Systems, Inc.  |   All Rights Reserved